Adapters Connector Kits Patch Cords & Pigtails Pre - termination Fanout Cable Field Installable Connector FTTH terminal Boxes & Sockets Rack Mount Patch Panel ODF and Distribution Frame Optical Enclosure
Optical PLC Splitter Optical FBT Coupler CWDM Module 4CH/8CH CWDM Mux/Demux Module DWDM Module Optical Attenuator Optical Isolator Optical Circulator Optical Collimator Optical Reflector/Terminator Optical Loopback
CWDM (Coarse Wavelength Division Multiplexer) is based on thin-film filter technology and patented athermal platform systems for optical devices. The CWDM is used to combine or separate different optical wavelength signals. This device offers a very flat and wide passband, low insertion loss, and high isolation,which make it ideal for CWDM Network applications and Optical Amplification Systems. Bangun CWDM devices are Bellcore GR-1221 qualification tested and are in compliance with industry green initiatives such as RoHS and WEEE. All Bangun CWDM products are epoxy-free in the optical path.
Features
· Widely Operating Wavelength Range
· Low Insertion Loss
· High Channel Isolation
· High Stability and Reliability
· Insensitive to shock and vibration
· Ultra Flat Wide Pass band
· Epoxy Free Optical Path
Applications
· System Monitoring
· WDM System
· Transmitters and Fiber lasers
· Fiber Optical Amplifier
· Fiber optic instruments
Specifications
Parameter | Specification | Unit | |
Channel Center Wavelength | 1270"'1610 or 1271-”1611 | nm | |
Channel Spacing | 20 | nm | |
Channel Clear Passband | ITU+7 | nm | |
Transmission Insertion Loss | Max | 0.8 (Typ 0.6) | dB |
Reflection Insertion Loss | Max | 0.6 (Typ 0.4) | dB |
Passband Ripple | Max | 0.3 | dB |
Transmission Isolation | Min | 30 | dB |
Reflection Isolation | Min | 12 | dB |
Return Loss | Min | 45 | dB |
Directivity | Min | 45 | dB |
Polarization Dependent Loss | Max | 0.1 | dB |
Operating Temperature Range | 0~ + 70 | °C | |
Storage Temperature Range | -40~+85 | °C | |
Maximum Power Handling | 300 | mW | |
Package Dimension (L" ¢) | 38*5.5 | mm |
Order Information
CWDM-3P | Center wavelength | Fiber Type | Connector Type |
1271~1611; 1270~1610 Example: 1271 = 1271nm | 1: 250μm bare fiber | 0: Without connector | |
2:900μm tight buffer fiber | 1: FC/ PC 2: FC/UPC 3: FC/APC | ||
other | 4: SC/PC S: SC/UPC 6: SC/APC | ||
7: ST 8: LC 9: MU X: Cusmized |