Adapters Connector Kits Patch Cords & Pigtails Pre - termination Fanout Cable Field Installable Connector FTTH terminal Boxes & Sockets Rack Mount Patch Panel ODF and Distribution Frame Optical Enclosure
Optical PLC Splitter Optical FBT Coupler CWDM Module 4CH/8CH CWDM Mux/Demux Module DWDM Module Optical Attenuator Optical Isolator Optical Circulator Optical Collimator Optical Reflector/Terminator Optical Loopback
S5800 Series is a new generation of full-10GE TOR switches, oriented for high-performance computing, data center and high-end campuses.
The S5800 Series adopts our most advanced hardware architecture designs.
S5800 Series (1U height) supports up to 2.56Tbps switching capacity and 48 10GE ports + 2 40GE ports + 4 100G ports or 72 10GE ports.
Developed on the basis of software platform with its own independent intellectual property rights, S5800 Series provides high-performance L2/L3/L4 wire speed switching capacity by integrating services such as IPv6, VPN, network security, flow analysis, virtualization, with high reliable techniques includ- ing continuous forwarding, graceful restarting and loop network protection, all which works effi ciency withing the S5800 Series fabric for guaranteed maximum runtime.
S5800 Series supports the “GreenTouch” architecture and “Smart@CHIP”. Its power consumption is lower than 200W.
S5800 series has 2 models: S5828 and S5864H.
Carrier-Level Aggregation Layer-3 Ethernet Switch Innovative
Virtualize multiple physical devices into one. The performance, reliability and management capabili- ties of the virtual system combine to outperform that of individual physical devices;
Improved Performance: BVSS system makes full use of each link in the physical device cluster, which avoids STP blocking on links and protects the original link to the maximum;
High Reliability: Based on the advanced distribution mechanism and effi cient cross-physical link aggrega- tion function, the logic control plane, service control plane and service data plane are separated. Thus, the device can support continuous layer3 routing forwarding, avoiding service interruption as a result of a single point of failure;
Easy Management: BVSS system realizessingle IP management, greatly improving the networking effi ciency and lowering operating costs.
Rich Data Center Services
S5800 Series supports BVSS, which can virtualize multiple physical devices into a single logical element. The virtualized system is superior to the independent physical device in performance, reliability, flexibility and management.
Doubled Performance: The virtualized system makes the best use of each link in the device and avoids blocking of STP to the links.
High-reliability: Based on the advanced distributed processing technique and the effi cient function of cross-physical device link aggregation, , the S5800 Series provides non-stop layer-3 routing forwarding and avoids single points of failure.
Data Center Level High-reliability
Flexibility: The virtual cluster function of the S5800 allows the distance of a cluster system to expand over up to 80KM, breaking the geographic restric- tions of traditional cluster techniques.
Easy Management: The whole virtual system realizes single IP unified management and simplifies the management of network device and network topology.
Security+
Equipment-level security: The advanced hardware infrastructure design realizes the level-based packet schedule and packet protection, prevents DoS-/TCP- related SYN Flood, UDP Flood, Broadcast Storm or large traffic attacks, and supports level-based command line protection, endowing different levels of users with different management permissions.
Perfect security authentication mechanisms: IEEE 802.1x, Radius.
S5800 series supports perfect ring detection mecha- nisms, ensuringlong-termnetworkperformancesta- bility.
S5800 series supports port isolation within the same VLAN, DHCP-Snooping, and IP + MAC + Port binding.
Versatile IPv6 Solution
S5800 Series supports the IPv6 protocol suite, IPv6 neighbor discovery, ICMPv6, path MTU discovery, DHCPv6, etc.;
S5800 Series supports Ping, Traceroute, Telnet, SSH, ACL based on IPv6;
S5800 Series supports MLD, MLD Snooping, IPv6 static routing, RIPng, OSPFv3 and BGP4+, etc.; Supports IPv6 tunnel: manual tunnel, automatic tunnel, GRE tunnel, 6to4 tunnel, ISATAP;
S5800 Series supports IPv4 transiting to IPv6: IPv6 manual tunnel, automatic tunnel, 6 to 4 tunnel, ISATAP tunnel.
Data Center Level High-reliability
S5800 Series adopts HPS (Hitless Protection System). The key components of he S5800 Series such as the power system and the fan system supports redundan- cy in design. All system modules support hot-swap and seamless switching without need of manual intervention.
S5800 Series supports redundancy protection mechanisms such as STP/RSTP/MSTP protocol, VRRP protocol, ring network protection, dual uplink active/- standby link protection and LACP link aggregation.
S5800 Series supports ISSU (In-Service Software Upgrade), guaranteeing non-stop forwarding of service data while the system is upgrading.
S5800 Series supports BFD and realizes fault detection and service recovery in seconds through linking with layer-2 or layer-3 protocol.
S5800 Series has perfect Ethernet OAM, 802.3ah, 802.1ag and ITU-Y.1731 which can monitor the network operating state in real time and rapidly detect and locate the malfunction.
High Reliability (99.999%): The MTTR of the S5800 Series is 50ms, satisfying the requirement for reliable delivery of carrier-level service.
Product Specifications
Item | S5828 | S5864H | ||
Interface | 24 10GE/GE SFP+ ports, 4100GE/40GEQSFP28ports | 48 10GE/GE SFP+ ports, 2 40GE QSFP+ ports, 4 100GE/40GE QSFP28 ports | ||
Console | 1 RJ45 console, 1 MGMT | 1 RJ45 console, 1 MGMT | ||
Backplane | 800Gbps | 1920Gbps | ||
Forwarding rate | 600Mpps | 1440Mpps | ||
Chassis | Dimensions (WxDxH) | 440x350x44 mm | 442x404x44 mm | |
Weight (empty) | 7.1 KG | 8.8 KG | ||
Package | Dimensions (WxDxH) | 576x448x94 mm | 616x488x140 mm | |
Weight | 8.3 KG | 10 KG | ||
Power consumption | no-load | 45 W | 102 W | |
full-load | 70 W | 147W | ||
Power supply (AC: 100V-240V, 50Hz±10%) | 2 | 2 | ||
Power status monitoring | Support | Support | ||
Total output BTU (1000BTU/H=293W) | 238.91 | 501.71 | ||
Fan number | 4 | 4 | ||
Noise@25°C(dBA) | 57 | 57 | ||
MTBF(H) | >200,000 | >200,000 | ||
Forwarding mode | Store-forward | Store-forward | ||
Flash (MB) | 64 | 54 | ||
DRAM (MB) | 1024 | 1024 | ||
MAC | 32K | 64K | ||
Jumbo frame | 16K | 16K | ||
Routing table | IPv4 | 16K | 16K | |
IPv6 | 12K | 8K | ||
ARP table | IPv4 | 10K | 16K | |
IPv6 | 10K | 2K | ||
Total SVI | 1K | 1K |
VLAN
• 4K Active VLAN, QinQ & Selective QinQ, GVRP, Private VLAN
Spanning Tree
• 802.1D (STP)
• 802.1W (RSTP) and 802.1S (MSTP)
• BPDU guard, root guard and loopback guard
Multicast
• PIM-SM, PIM-DM,
• IGMP v1/v2/v3,
• IGMP Snooping,
• IGMP Fast Leave,
• MVR, IGMP filter
IPv4
• Static routing, RIP v1/v2,
• OSPF, BGP, PBR, ECMP
• BFD for OSPF, BGP
Certification
CE, FCC, ROHS
IPv6
• ICMPv6, DHCPv6, ACLv6 and IPv6 Telnet
• IPv6 neighbor discovery, Path MTU discovery
• MLD snooping
• IPv6 Static Routing, RIPng, OSPFv3, BGP4+
• Manual tunnel, ISATAP tunnel, 6 to 4 tunnel
MPLS
• Multi-VRF
QoS
• CAR, HQoS, MAC/IP/TCP/UDP/ VLAN/COS/DSCP/TOS based QoS,
• 802.1P/DSCP priority re-label- ing, SP, WRR, and “SP+WRR”, Tail-Drop,
• WRED, flow monitoring and traffi c shaping
Security
• Port isolation, Port security, and“IP+MAC+port” binding, MAC sticky,
• DHCP Snooping and option 82, DAI & IP source guard, PPPoE+,
• IEEE 802 .1x , Radius and Tacacs+L2/L3/L4 ACL flow identification and filtration Anti-attack from.
• DDoS, TCP’s SYN Flood, UDP Flood, etc.
• Broadcast/multicast/unknown unicast storm-control
• MD5, SHA-256, RSA-1024, AES256, etc.
Management
• Console, Telnet, SSH v1/2, HTTP/HTTPS
• SNMP v1/v2/v3, RMON
• TFTP, FTP, SFTP NTP, SPAN, RSPAN
Ordering Information
Item | Description |
S5828 | Ethernet routing optical switch with 24 10GE ports+4 100G ports (1 console port, 1 out- band port, 1 USB2.0, 24 10GE/GE SFP+ ports, 4 100GE/40GE QSFP28 ports(can expand to 4 10GE ports); 2 hot-swap power slots with dual AC220 power supplies; 4 fans; 1U, 19-inch rack-mounted installation) |
S5864H | Ethernet routing switch with 48 10GE ports, 2 40GE ports and 4 100GE ports (1 console port, 1 out-band port, 48 10GE/GE SFP+ ports, 2 40GE QSFP+ ports, 4 100GE (can expand to 4 10GE ports), 2 power slots with 2 hot-swap AC220V power supplies; 4 fan slots, including 4 fans; 1U, 19-inch rack-mounted installation) |
100G Optical Modules | |
QSFP28-SR4-100m | 100G multi-mode QSFP28 optical module(100m, 850nm, MPO, DDM) |
QSFP28-LR4-10 | 100G single-mode QSFP28 optical module(10km,1310nm,LC,DDM) |
QSFP28-LR4-20 | 100G single-mode QSFP28 optical module(20Km,1310nm,LC,DDM) |
40GE Optical Modules | |
QSFP+SR4-100m | 40G multi-mode QSFP+ optical module (100m, 850nm, MPO, DDM, supports 1 to 4) |
QSFP+LR4-10 | 40G single-mode QSFP+ optical module (10km, 1310nm, LC, DDM) |
QSFP+LR4-20 | 40G single-mode QSFP+ optical module(20Km, 1310nm, LC, DDM) |
QSFP+ER4-40 | 40G single-mode QSFP+ optical module(40Km, 1310nm, LC, DDM) |
10GE Optical Modules | |
SFP+TX | 10GE SFP+ to-RJ45 module |
SFP+SX | 10GE SFP+ multi-mode (300m, 850nm, LC) |
SFP+LX-10 | 10GE SFP+ single-mode (10Km, 1310nm, LC, DDM) |
SFP+LX-20 | 10GE SFP+ single-mode (20Km, 1310nm, LC, DDM) |
SFP+LX-40-1310 | 10GE SFP+ single-mode (40km, 1310nm, LC, DDM) |
SFP+LX-80 | 10GE SFP+ single-mode (80Km, 1550nm, LC, DDM) |
SFP+LX-SM-1270-10 SFP+LX-SM-1330-10 | 10GE SFP+ single-mode, single-fiber (10Km, TX1270/RX1330, LC, DDM) 10GE SFP+ single-mode, single-fiber (10Km,TX1330/RX1270, LC, DDM) |
SFP+LX-SM-1270-20 SFP+LX-SM-1330-20 | 10GE SFP+ single-mode, single-fiber (20Km, TX1270/RX1330, LC, DDM) 10GE SFP+ single-mode, single-fiber (20Km,TX1330/RX1270, LC, DDM) |
SFP+LX-SM-1270-40 SFP+LX-SM-1330-40 | 10GE SFP+ single-mode, single-fiber (40Km, TX1270/RX1330, LC, DDM) 10GE SFP+ single-mode, single-fiber (40Km,TX1330/RX1270, LC, DDM) |
GE Optical Modules | |
GSFP-TX-B | GE SFP-to-RJ45 module |
GSFP-SX-D | GE SFP multi-mode (500m, 850nm, LC, DDM) |
GSFP-LX-10-D | GE SFP single-mode (10Km, 1310nm, LC, DDM) |
GSFP-LX-20-D | GE SFP single-mode (20Km, 1310nm, LC, DDM) |
GSFP-LX-40-D | GE SFP single-mode (40Km, 1310nm, LC, DDM) |
GSFP-ZX-80-D | GE SFP single-mode (80Km, 1550nm, LC, DDM) |
GSFP-ZX-120-D | GE SFP single-mode (120Km, 1550nm, LC, DDM) |
GSFP-LX-SM1310-10-BIDI GSFP-LX-SM1550-10-BIDI | GE SFP single-mode, single core bidirectional (10Km, TX1310/RX1550, LC, DDM) GE SFP single-mode, single core bidirectional (10Km, TX1550/RX1310, LC, DDM) |
GSFP-LX-SM1310-20-BIDI GSFP-LX-SM1550-20-BIDI | GE SFP single-mode, single core bidirectional (20Km, TX1310/RX1550, LC, DDM) GE SFP single-mode, single core bidirectional (20Km, TX1550/RX1310, LC, DDM) |
GSFP-LX-SM1310-40-BIDI GSFP-LX-SM1550-40-BIDI | GE SFP single-mode, single core bidirectional (40Km, TX1310/RX1550, LC, DDM) GE SFP single-mode, single core bidirectional (40Km, TX1550/RX1310, LC, DDM) |
GSFP-LX-SM1490-80-BIDI GSFP-LX-SM1550-80-BIDI | GE SFP single-mode, single core bidirectional (80Km, TX1490/RX1550, LC, DDM) GE SFP single-mode, single core bidirectional (80Km, TX1550/RX1490, LC, DDM) |
GSFP-LX-SM1490-120 GSFP-LX-SM1550-120 | GE SFP single-mode, single core bidirectional (120Km, TX1490/RX1550, LC, DDM) GE SFP single-mode, single core bidirectional (120Km, TX1550/RX1490, LC, DDM) |