Adapters Connector Kits Patch Cords & Pigtails Pre - termination Fanout Cable Field Installable Connector FTTH terminal Boxes & Sockets Rack Mount Patch Panel ODF and Distribution Frame Optical Enclosure
Optical PLC Splitter Optical FBT Coupler CWDM Module 4CH/8CH CWDM Mux/Demux Module DWDM Module Optical Attenuator Optical Isolator Optical Circulator Optical Collimator Optical Reflector/Terminator Optical Loopback
S2500-P Series is a new-generation intelligent PoE access switch designed for carrier's IP MAN and enterprise networks.
Based on the new-generation high-performance hardware and BDROS platform, it supports functions such as ACL, QinQ and QoS. Its simple management mode and flexible installation can meet the requirement of any complicated scenarios.
S2500-P Series has 3 models: S2510-P, S2520-P and S2528-P.
Carrier-Level Ethernet Access Switch
S2500-P Series supports the carrier-level Ethernet-ring protection protocol with less than 50ms recovery time , STP/RSTP/MSTP, backup uplink ports, and LACP link aggregation to cater to the requirements of high reliability of carriers;
S2500-P Series has powerful ACL functions to access and control L2-L7 data based on physical port, providing carriers flexible and various policy control methods;
S2500-P Series supports In-Service Software Upgrade (ISSU) to ensure the unremitting data forwarding during system upgrade;
S2500-P Series supports various L2 multicast functions such as IGMP-snooping, fast-leave and MVR to fully meet the operation requirements of carrier’s IPTV.
Intelligent PoE+
S2500-P Series supports IEEE 802.3AF/AT PoE standard, and power mapping scales up to a maximum of 370W of PoE+ power;
S2500-P Series supports PoE non-stop power supply. The PoE+ power is maintained during a switch reload;
S2500-P Series supports manual and dynamic PoE power allocation;
S2500-P Series supports up to 2KV thunder-proof of the PoE port and power supply;
Enhanced QoS
S2500-P Series supports priority retagging and complicated flow classification based on VLAN, MAC, source address, destination address, IP or priority, better streamlining carrier’s services;
S2500-P Series provides flexible bandwidth control policies, supporting port-/flow-based flow limit, ensuring the line speed forwarding of each port;
S2500-P Series supports multiple queue schedule algorithms such as SP, WRR and “SP + WRR”;
Security+
Equipment-level security: The advanced hardware infrastructure design realizes the level-based packet schedule and packet protection, prevents DoS-/TCP- related SYN Flood, UDP Flood, Broadcast Storm or large traffic attacks, and supports level-based command line protection, endowing different levels of users with different management permissions.
Perfect security authentication mechanisms: IEEE 802.1x, Radius and BDTacacs+.
S2500-P Series supports storm/multicast/unicast limit, ensuring the normal running of equipment in harsh network conditions.
S2500-P Series supports perfect ring detection mechanism, ensuring the long-term stable running of network.
S2500-P Series supports port isolation within the same VLAN, DHCP-Snooping, and IP + MAC + Port binding.
Easy Management and Maintenance
S2500-P Series supports many management modes such as the CLI, Telnet, SSH, SSL and SNMP;
S2500-P Series supports the WEB management mode, which is easy and efficient for installing and debugging the device;
S2500-P Series supports FTP,TFTP and SFTP;
S2500-P Series supports ISSU (In-Service Software Upgrade);
S2500-P Series supports SNMP and BDCOM NMS smart network management platform. The combination realizes automatic equipment discovery, network topology management, equipment configuration management , performance data statistics and analysis and trouble management;
S2500-P Series supports Zero Touch Provisioing(ZTP) function to minimize manual operator intervention and helps reduce customers’ initial deployment costs.
Product Specifications
Item | S2510-P | S2520-P | S2528-P | ||
Interface | 8 GE PoE ports, 2 100/1000M SFP ports | 16 GE PoE ports, 2 GE TX/SFP combo ports 2 100/ 1000M SFP ports | 24 GE PoE ports, 4 GE TX/SFP combo ports | ||
Console | 1 RJ45 port, 1 RST button | 1 RJ45 port, 1 RST button | 1 RJ45 port, 1 RST button | ||
Backplane | 20 Gbps | 40 Gbps | 56 Gbps | ||
Forwarding rate | 15 Mpps | 30 Mpps | 42 Mpps | ||
Chassis | Dimensions (WxDxH) | 280x180x44 mm | 440x210x44 mm | 440x210x44 mm | |
Weight (empty) | 1.6 KG | 2.8 KG | 3 KG | ||
Package | Dimensions (WxDxH) | 346x289x92 mm | 555x295x88 mm | 555x295x88 mm | |
Weight | 2.4 KG | 3.9 KG | 4.1 KG | ||
Power consumption | no-load | <7 W | <15 W | <17 W | |
full-load | 142.5 W | 261.4 W | 393.5 W | ||
Power supply (AC: 100V-240V, 50Hz±10%) | 150 W | 265 W | 400 W | ||
POE power budge | 130 W | 250W | 370 W | ||
Total output BTU (1000BTU/H=293W) | 511.95 | 892.15 | 1365.19 | ||
Fan number | / | 2 | 2 | ||
Noise@25°C(dBA) | 0 | 37.5 | 37.5 | ||
MTBF(H) | >50,000 | ||||
Forwarding mode | Store-forward | ||||
Flash (MB) | 16 | ||||
DRAM (MB) | 128 | ||||
MAC | 8K | ||||
Buffer size(Mb) | 4.1 | ||||
Jumbo frame | 9K | ||||
Total SVI | 10 |
VLAN
• 4K Active VLAN
• QinQ & Selective QinQ
• GVRP, Private VLAN
• Voice VLAN
Spanning Tree
• 802.1D (STP)
• 802.1W (RSTP) and 802.1S (MSTP)
• BPDU guard, root guard and loopback guard
Multicast
• IGMP v1/2/3
• IGMP Snooping
• IGMP Fast Leave
• IGMP Filter
• MVR
IP
•Static route
•RIP, OSPF
•512 routing table
•IP v4/v6 dual stack
•DHCP Server/Client/Relay
Certification
CE, FCC, ROHS
QoS
•CAR, HQoS, MAC/IP/TCP/UD- P/VLAN/COS/DSCP/TOS based
•QoS,802.1P/DSCP priority relabeling, SP, WRR, and “SP+WRR”,
•Tail-Drop, WRED, flow monitor- ing and traffic shaping.
Security
•Port isolation, Port security, and “IP+MAC+port” binding, MAC sticky, DHCP Snooping and option 82, DAI & IP source guard, PPPoE+,
•IEEE 802 .1x , Radius and Tacacs+
•L2/L3/L4 ACL flow identifica- tion and filtration Anti-attack from. DDoS, TCP’s SYN Flood, UDP Flood, etc.
•Broadcast/multicast/unknown unicast storm-control
•MD5, SHA-256, RSA-1024, AES256, etc.
Reliability
• Static/LACP link aggregation, Interface backup
• EAPS and ERPS
• ISSU
Management
• Console, Telnet , SSH v1/2, HTTP, HTTPS, SNMP v1/v2/v3, RMON
• TFTP, FTP, SFTP
• NTP
• ZTP(Zero Touch Provision- ing)SPAN, RSPAN
Accessories
• Power cord, rackmount kits, console cable, anti-slipping pad
Environment
• Operating temperature/ humidity: 0ºC -50ºC, 10%-90% non-condensing
• Storage temperature/humidity: -20ºC -70ºC, 5%-95% non-condensing
Ordering Information
Item | Description |
S2510-P | Ethernet PoE switch with 10 GE ports (1 console port, 8 GE PoE ports, 2 100/1000M SFP ports, 1 standard AC220V power supply, 150W , fanless, 1U, rack-mounted installation) |
S2520-P | Ethernet PoE switch with 20GE ports (1 console port, 16 GE PoE ports, 2 100/1000M SFP ports, 2GE TX/SFP combo ports, 1 standard AC220V power supply, 265W, the cooling fan, 1U, standard 19-inch rack-mounted installation) |
S2528-P | Ethernet PoE switch with 28 GE ports (1 console port, 24 GE PoE ports, 4 GE TX/SFP combo ports, 1 standard AC220V power supply, 400W, the cooling fan, 1U, standard 19-inch rack-mounted installation) |
100M Optical Modules | |
FSFP-SX-1310 | 100M SFP multi-mode (2Km, 1310nm, LC, DDM) |
FSFP-LX-15 | 100M SFP single-mode (15Km, 1310nm, LC, DDM) |
FSFP-LX-40 | 100M SFP single-mode (40Km, 1310nm, LC, DDM) |
FSFP-ZX-80 | 100M SFP single-mode (80Km, 1550nm, LC, DDM) |
FSFP-LX-SM1310-20-BIDI FSFP-LX-SM1550-20-BIDI | 100M SFP single-mode, single fiber (20Km, TX1310/RX1550, LC, DDM) 100M SFP single-mode, single fiber (20Km, TX1550/RX1310, LC, DDM) |
FSFP-LX-SM1310-40-BIDI FSFP-LX-SM1550-40-BIDI | 100M SFP single-mode, single fiber (40Km, TX1310/RX1550, LC, DDM) 100M SFP single-mode, single fiber (40Km, TX1550/RX1310, LC, DDM) |
FSFP-LX-SM1310-80-BIDI FSFP-LX-SM1550-80-BIDI | 100M SFP single-mode, single fiber (80Km, TX1310/RX1550, LC, DDM) 100M SFP single-mode, single fiber (80Km, TX1550/RX1310, LC, DDM) |
GE Optical Modules | |
GSFP-TX-B | GE SFP-to-RJ45 module |
GSFP-SX-D | GE SFP multi-mode (500m, 850nm, LC, DDM) |
GSFP-LX-10-D | GE SFP single-mode (10Km, 1310nm, LC, DDM) |
GSFP-LX-20-D | GE SFP single-mode (20Km, 1310nm, LC, DDM) |
GSFP-LX-40-D | GE SFP single-mode (40Km, 1310nm, LC, DDM) |
GSFP-ZX-80-D | GE SFP single-mode (80Km, 1550nm, LC, DDM) |
GSFP-ZX-120-D | GE SFP single-mode (120Km, 1550nm, LC, DDM) |
GSFP-LX-SM1310-10-BIDI GSFP-LX-SM1550-10-BIDI | GE SFP single-mode, single fiber (10Km, TX1310/RX1550, LC, DDM) GE SFP single-mode, single fiber (10Km, TX1550/RX1310, LC, DDM) |
GSFP-LX-SM1310-20-BIDI GSFP-LX-SM1550-20-BIDI | GE SFP single-mode, single fiber (20Km, TX1310/RX1550, LC, DDM) GE SFP single-mode, single fiber (20Km, TX1550/RX1310, LC, DDM) |
GSFP-LX-SM1310-40-BIDI GSFP-LX-SM1550-40-BIDI | GE SFP single-mode, single fiber (40Km, TX1310/RX1550, LC, DDM) GE SFP single-mode, single fiber (40Km, TX1550/RX1310, LC, DDM) |
GSFP-LX-SM1490-80-BIDI GSFP-LX-SM1550-80-BIDI | GE SFP single-mode, single fiber (80Km, TX1490/RX1550, LC, DDM) GE SFP single-mode, single fiber (80Km, TX1550/RX1490, LC, DDM) |
GSFP-LX-SM1490-120 GSFP-LX-SM1550-120 | GE SFP single-mode, single fiber (120Km, TX1490/RX1550, LC, DDM) GE SFP single-mode, single fiber (120Km, TX1550/RX1490, LC, DDM) |